cjlpn3
New Forum Member
Posts: 10
|
Post by cjlpn3 on Mar 7, 2007 10:00:36 GMT -5
:Thinking of buying an aztec propane burnisher, does anyone have any suggestions on what burnisher is best . i have a small business and need bang for my buck. What should I ask before buying? I have an electric burnisher but I am getting more floor care and need to upgrade.
|
|
|
Post by logan5127 on Mar 7, 2007 15:20:10 GMT -5
I like the pioneer 21" with no bells and whistles. You can get ones that have battery start and clutch drives but the simple ones are the best in my opinion. There is less to break down and they are easier to monuver since there is no battery box and so on. They still have electric starters and can be hand cranked as well. Different brands will run around $2300. The 24" is OK if you are doing big stores but if you have small accounts as well the 21" will get into more of the tight spots. I also prefer the Blue/Aqua pads. Some of the buffers now are longer than they use to be making them a little bit harder to turn in tight places. These are sometimes called tilt back decks. They were designed to tilt back so that the buffer deck is vertical making it easier to replace the pad. However the short design will lay on its side and pad is easy to change on them as well. I prefer the short deck. Sadly the Pioneer Brand no longer comes in the short deck.
|
|